Installation, Remove the shipping struts | Miele W 1986 specs

Installation

Installation

–Lift the machine from its shipping pallet and move it to the installation site.

–Do not lift the washer by the drum door.

–Ensure that the machine’s feet and the floor are dry to prevent slippage during the spin cycle.

Remove the shipping struts

^Turn the left shipping strut counter- clockwise 90°.

^Turn the right shipping strut clock- wise 90°.

39

Image 43

Miele W 1986 operating instructions Installation, Remove the shipping struts

Contents

Operating instructions Contents Installation instructions Important Safety Instructions Control panel Guide to the washer Before using the washer Prepare and sort laundry Using the washer Load the laundry Fine rinse Select a programJeans Dress shirts Fabric Cottons Program guide Special spin options Select a spin speed Select wash options if needed Add detergent Water softener DetergentDo not use chlorine bleach Water hardness Fabric dye Using the Starch programFabric softener Starch Start the program Select Delay StartActivate the program lock if necessary Remove the laundry Unload the laundry Adding/removing laundry during a wash program Cancelling a program that has not yet startedDrum door can not be opened if To change a program Cancelling a program that has startedMaking changes to the pro- gram Skipping part of a program To activate the program lock To cancel the program lockLocking the washer Electronic program lock To activate the safety lock Child Safety LockTo deactivate the safety lock Cleaning the detergent drawer Cleaning the washerWasher care Cleaning the drain pump and lint trap After cleaning Quick Guide Select a program Quick GuidePrepare and sort laundry Load the laundry Unload the laundry Select Delay Start if needed Start the programSelect wash options if needed Add detergent Activate the program lock if necessary Program guide Cleaning the inlet hose filter Cleaning the water inlet filtersCleaning the filter in the inlet valve Program stops and a fault indicator blinks Frequently asked questionsProgram will not start Program runs normally but a fault indicator lights up Poor wash results Gent residue on What if … Possible cause Fix Laundry has aGray sticky residue? There is white deter Door will not open when the Door button is pressed Opening the drum door during a power failure PC Update After Sales Service Installation Instructions Electrical connection InstallationHelp protect our environment Plumbing connection Disposal of the packing materials Help protect our environmentDisposal of an old appliance Front view Installation Installation site Washer / Dryer Stack Installation beneath a counter Remove the shipping struts Installation Installation Level the washer Adjust the four leveling feet Water connection Plumbing connection Plumbing connection Connection to the drain system Grounding Instructions Electrical connectionPage Page Alterations rights reserved /000/1302