Washer care

Once the flow of water stops:

^Remove the lint trap lid.

^Clean out any foreign objects or lint from the filter.

^Check that the drain pump impeller (in the back of the chamber) rotates freely by spinning with your hand.

^Clean the inside of the lint trap hous- ing.

Remove any detergent deposits or foreign objects from the threads of the filter housing and filter unit before returning the lint trap.

^Return the lint trap and tighten into place.

,If the lint trap is not tightened se- curely water will leak out when the machine is used.

After cleaning:

^Run the "Fine rinse" program.

This step is necessary to activate the ball valve.

24

Page 24
Image 24
Miele W 1986 operating instructions After cleaning