| Adjusting Headgear |
| (Continued) |
| Xlix and Elite Models− |
| . There are four headgear adjust- |
| ments: headgear top, tightness, |
| angle adjustment, and distance |
1 | adjustment. |
31 Headgear Top
Adjusts headgear for proper depth on the head to ensure correct bal- ance and stability.
2 Headgear Tightness
To adjust, push in the adjusting knob located on the back of the headgear and turn left or right to desired tight- ness.
. If adjustment is limited, it may be
|
|
| necessary to remove the com- | |
|
|
| fort cushion. | |
|
| 3 | Distance Adjustment | |
|
| Adjusts the distance between the | ||
|
| face and the lens. To adjust, loosen | ||
|
| both outside tension knobs and | ||
|
| press inward to free from adjustment | ||
|
| slots. Move forward or back to de- | ||
2 | 4 | sired position and retighten. (Both | ||
sides must be equally positioned for | ||||
|
| |||
|
| proper vision.) | ||
|
| 4 | Angle Adjustment | |
Four pins on the right side of the headband top provide adjustment for the forward tilt of the helmet. To adjust, loosen the right outside ten- sion adjustment knob then lift on the control arm tab and move it to the de- sired position. Retighten tension ad- justment knob.
. When using either the front or back distance adjustment posi- tions, only the center three angle adjustment pins can be used.
804 118
Page 8
