Miller Electric INTEGRA 201/241 manual Installing Drive Roll and Wire Inlet Guide

2-5. Installing Drive Roll and Wire Inlet Guide

3

5

2

4

1

1Securing Screw

2Inlet Wire Guide

Loosen screw. Slide tip as close to drive rolls as possible without touch- ing. Tighten screw.

3Wire Tension Wheel

4Drive Roll

Install correct drive roll for wire size and type.

5 Drive Roll Tension Assembly

Turn nut one click to secure drive roll.

ST-150 227-C

2-6. Installing Wire Spool and Adjusting Hub Tension

When a slight force is needed to turn spool, tension is set.

Tools Needed:

15/16 inST-072573-B

2-7. Electrical Service Guide

	201	241
Input Voltage	230	230
Input Amperes at Rated Output	26	35
Max Recommended Standard Fuse or Circuit Breaker Rating in Amperes	26	35
** Input Conductor Size in mm2	4	4
** Grounding Conductor Size in mm2	4	4

** Power cord supplied with the unit is sized for 230V operation. Larger power cord may be required for cable lengths greater than 3 meters. C onsult national and local regulations.

OM-188 414 Page 7