Miller Electric Regency 250 manual Placing Jumper Links And Connecting Input Power

2-9. Placing Jumper Links And Connecting Input Power

	1
200V	230V	460V
		S-153 408-A	2

Check input voltage available at site.

1Jumper Link Label

2Jumper Link

Move jumper links to match input power.

3 Line Disconnect Device

Select type and size of overcurrent protection using Section 2-8. Rat- ings must comply with applicable codes. Install conductors in conduit or equivalent into a deenergized line disconnect device.

Reinstall wrapper.

YSpecial installation may be required where gasoline or volatile liquids are present – see NEC Article 511 or CEC Section 20.

GND/PE

Earth Ground

3

L1

L2

Tools Needed:

3/8 in

S-0279-B / Ref. 121 471-H

OM-293 Page 13