MAINTENANCE
WARNING!
To reduce the risk of injury, always unplug your tool before performing any mainte- nance. Never disassemble the tool or try to do any rewiring on the tool's electrical sys- tem. Contact a MILWAUKEE service facility for ALL repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance pro- gram. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mount- ing, broken parts and any other condition that may affect its safe opera- tion. If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before further use. Do not use a dam- aged tool. Tag damaged tools "DO NOT USE" until repaired (see "Repairs").
WARNING!
To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow liquid to flow inside the tool.
Repairs
If your tool is damaged, return the entire tool to the nearest service center listed on the back cover of this operator’s manual.
WARNING!
To reduce the risk of injury, use only identical replacement parts.
WARRANTY
Every MILWAUKEE tool is thoroughly inspected and tested before leaving our manufacturing facilities. Should any trouble develop, return the complete tool prepaid to our Corporate Office, Branch Office/Ser- vice Center or nearest Authorized MILWAUKEE Service Station. If in- spection shows the trouble is caused by defective workmanship or material, all repairs will be made without charge, and the tool will be returned, transportation prepaid. Battery packs for cordless tools are warranted for one year from the date of purchase.
This warranty does not apply where: (1) repairs or attempted repairs have been made by persons other than MILWAUKEE personnel or Authorized Service Station personnel; (2) repairs are required because of normal wear; (3) the tool has been abused or involved in an accident;
(4)misuse is evident, such as caused by overloading the tool beyond its rated capacity; (5) the tool has been used after partial failure or (6) the tool has been used with an improper accessory. No other warranty, written or verbal, is authorized.
ACCESSORIES
WARNING!
Unplug tool before removing or attaching accessories. Maximum Safe Operating Speed of wire brush and grinding wheel must be greater than no load RPM of tool. Guards must be used with grinding wheels and wire wheels. Only use specifically recommended accessories. Others may be hazardous.
Wheels For Bench Grinders
NOTE: The maximum safe operating speed shown on the grinding and wire wheels must be greater than the load speed of the tool.
Grinding Wheels
Grinding Wheels are available in 36, 60, and 80 vitrified grit for all types of grinding.
Knot Wire Wheels
Use Knot Wire Wheels for removing rust, scales and file marks.
Brushes
Brushes are made of select steel wire and have a face width of 3/4".
Cloth Buffing Wheels
Use Cloth Buffing Wheels for buff- ing metal surfaces. These wheels are made of multiple layers of select buffing cloth sewed securely to- gether and can be coated with glue and dipped in emery grit for finish grinding or rough polishing.
Plexiglass Lens
Replacement lens for all light eye shield models and Catalog No. 4995. Supplied individually.
Plexiglass Eye Shield (Pair) Furnished as standard equipment on Catalog No. 4935. Easily replaced when pitted. Supplied as a pair.
Grinder Pedestal
Heavy grey iron casting with tubular steel column. Removable water pot. Adaptable to all models.
For a complete listing of accessories refer to your MILWAUKEE Electric Tool Catalog. To obtain a catalog, contact your local distributor or a service center listed on the back cover of this operator's manual.
Page 9
