Milwaukee M4910-20 manuel dutilisation Operation, Applications

ASSEMBLY

Installing NOZZLE TIP GUARD on DUAL-ACTION™ pistol-grip sprayer

See Figures 6 - 7.

See operator’s instructions for flushing, priming, and cleaning before installing a spray tip. Note all warnings regarding use of DUAL-ACTION™ pistol-grip sprayer and the possibility of injection.

Push the lock-off lever down to lock the sprayer trig- ger.

Unscrew the nozzle tip guard.

NOTE: Small parts inside the tip guard can be easily dropped and misplaced. Always remove the nozzle tip guard carefully.

Insert tip sleeve into the nozzle tip guard while aligning the holes.

Insert the desired reversible spray tip into the nozzle tip guard, locking the sleeve into place.

Insert metal saddle into the nozzle tip guard. The metal saddle should be securely seated on the reversible spray tip.

Insert the rubber seal ridged side down onto the saddle in the nozzle tip guard.

Thread nozzle tip guard assembly onto sprayer and tighten securely.

Push spray tip securely into nozzle tip guard.

Keep the sprayer trigger locked when not in use.

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

APPLICATIONS

You may use this product for the purposes listed below:

Exterior painting and staining of decks, outdoor furniture, fences, siding, and interior/exterior spray-painting of walls, cabinets, and doors.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.

WARNING:

WARNING:

To reduce the risk of injection NEVER change spray tip without setting the lock-off on the pistol-grip sprayer and never point sprayer at any part of the body, persons, or unit itself. In case of skin injection, seek medical attention immediately. Failure to heed this warning may cause serious personal injury.

Do not use any attachments or accessories not	Locking the DUAL-ACTION™pistol-grip
recommended by the manufacturer of this product. The	sprayer
use of attachments or accessories not recommended	See Figure 6.
can result in serious personal injury.	Always lock the sprayer trigger when you have stopped
AccEssories	spraying to prevent the sprayer from being bumped or
	triggered accidentally and causing injection.
All accessories used with this product must be rated greater
	 Push the lock-off lever down to lock the sprayer trig-
than 3200 psi. Ensure compatibility and fit before using any
	ger.
accessory with this product.
	 Push the lock-off lever toward the handle to unlock the

WARNING:	trigger.
	Release Pressure procedure
Risk of fire or explosion - spray area must be well
	See Figure 8.
ventilated and away from spark of flames. Failure to heed
	Always follow this procedure when shutting the airless/finish
this warning could result in serious personal injury.
	paint sprayer OFF for any reason. This procedure releases
	pressure in the high pressure hose.
	 Push the lock-off lever down to lock the sprayer trigger.
	 Turn HI/OFF/FINISH switch OFF.
9 — English