ASSEMBLY
UNPACKING
This product requires assembly.
Carefully lift the product from the carton and place on a level work surface.
WARNING:
Do not use this product if any parts on the Loose Parts List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer instal- lation. Use of a product that may have been improperly assembled could result in serious personal injury.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
loose parts LIST |
|
See Figure 2. |
|
Description | Qty. |
5 Gallon container lid | 1 |
|
|
Nozzle tip guard | 1 |
Wheel | 2 |
Axle | 2 |
Washer | 2 |
Hitch pin | 2 |
25 Ft. air hose | 1 |
25 Ft. high pressure hose | 1 |
310 Reversible spray tip | 1 |
619 Reversible spray tip | 1 |
Garden hose attachment | 1 |
Elastic strap | 1 |
Operator’s manual (not shown) | 1 |
WARNING:
If any parts are damaged or missing do not operate this tool until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
Tools needed
Adjustable wrench
installing the Wheels
See Figure 3.
To attach the wheels to the base:
n Locate the axle.
n Slip the axle through the wheel hole. Slide washer onto axle.
n Lifting the paint sprayer slightly, slide the axle, wheel, and washer into the wheel mounting hole in the machine base.
n Push the hitch pin into the hole on the end of the axle to secure assembly.
n Repeat with the second wheel assembly.
folding THE HANDLE
See Figure 4.
To raise the handle: pull the handle up until the handle release knob snaps through the locking hole to secure the handle in place.
To lower the handle (for storing): pull the handle release knob on the right side of handle and lower.
WARNING:
Never use the handle to lift the paint sprayer. Failure to heed this warning could result in serious personal injury.
CONNECTING High pressure hose/
See Figure 5.
To connect the high pressure hose to the paint sprayer:
nScrew the collar of the high pressure hose onto the paint connect outlet located on the control panel.
nTighten securely with an adjustable wrench.
To connect the
nScrew the collar on the high pressure hose onto the
nUse an adjustable wrench to turn and tighten the nut on the hose end and tighten securely.
8 — English
