| THE MINELAB EXPLORER II |
|
ADVANCED MODE OPTION |
|
|
Once you have experimented with target options and the other features of Quickstart, |
| |
it may be time to investigate the features of the Explorer II available to the advanced user. |
| |
| Moving to Advanced mode |
|
| Figure 5.28, 5.29 |
|
| Main Menu > Options > ADVANCED |
|
| Press the MENU shortcut button, select OPTIONS from the |
|
| displayed list and then select ADVANCED mode. |
|
Figure 5.28 Options screen in Quickstart | The detector moves into ADVANCED mode and a new OPTIONS |
|
|
| |
| menu appears displaying the broader array of options available to |
|
| you in Advanced mode. |
|
| If you are ready for advanced detecting, read through Chapter 6: |
|
| Advanced Use. It is likely you will only need to return to this |
|
| chapter for background on basic adjustments and general |
|
Figure 5.29 Options screen in Advanced | detector operation. |
|
|
| |
| Just remember that it is always possible to return to Quickstart | 5 |
| mode. If at any time you become a little confused with the settings | QUICKSTART |
| reset the detector: | |
| for your detector, or just want to brush up on basic detector use, it |
|
| is simple to reset the Explorer II to its original factory settings. To |
|
| • Turn the detector off |
|
| • Press and hold the POWER button until a |
|
| is sounded. The Minelab logo and the words ‘Factory Presets’ |
|
| will be briefly displayed on screen. |
|
| You will be returned to the original Quickstart settings and you may |
|
| resume basic detecting or make selections from the Main Menu. |
|
| $ |
|
| You are now ready to proceed to Chapter 6: Advanced Use. |
|
|
| 65 |
| ADVANCED MODE OPTION |
|
