Minelab II Quickstart’S Digital Display, Digital display, ferrous and conductivity rating

	THE MINELAB EXPLORER II
QUICKSTART’S DIGITAL DISPLAY
	Digital display
	Figure 5.7, 5.8
	When the Smartfind screen is displayed, pressing the DETECT
	shortcut button on the control panel switches to the Explorer II’s
P0611-A	alternative Digital display.
Figure 5.7 Quickstart’s Digital Display	The display rates both the ferrous content and the conductivity of an
	object with numbers from 0-31. The number for ferrous content is
	under the label ‘Fer’ and that for the conductivity is under the label
	‘Cond’. A value of 0 represents low ferrous content and 31
	represents high ferrous content. Similarly, 0 represents low
P0612-A	conductivity and 31 represents high conductivity.
Figure 5.8 Digital as full screen display	The right of the digital read-out you will see an icon representing the
Preferred Display	possible target and, in full screen display, a list of displaying up to
	three possible target classifications.
The Explorer II remembers which	It is important to note that the discrimination settings (either the	5
	current Discrimination Pattern or the Iron Mask are still active and
display was last used in your
	targets outside the accepted area will not update the display. If you	QUICKSTART
detecting. If this happens to be
	want to adjust the discrimination, simply press the DETECT button to
Digital, this display will appear
	return to the Smartfind display.
next time you turn on the detector.
It should be noted that any	HINT The digits shown in Digital display are a numeric
	estimation of the horizontal and vertical position of the
adjustments to discrimination that
	target crosshair displayed in Smartfind mode (that is, its
are made in Smartfind will be
	ferrous and conductivity rating).
retained and used in Digital.	As you familiarize yourself with each display, try switching
	from one to the other to compare the results.
		47
	QUICKSTART’S DIGITAL DISPLAY