Minelab II quick start Easy reference

		THE MINELAB EXPLORER II
QUICKSTART DISPLAY
easy reference
1 Sensitivity level. The sensitivity bar and	5	Smartfind display. The shaded and unshaded
numbers indicate how responsive the detector is		areas of the screen are Smartfind’s preset
to a target in the presence of ground noise and/or		Discrimination setting. Smartfind also has an
electromagnetic interference. Numbers range		alternative Iron Mask setting. See pages 42-43.
between 1 and 32. When the shift button next to		Pinpoint. This shaded block indicates whether
the number is pressed the detector moves	6
between semi-auto and manual sensitivity. See		PINPOINT is ON or OFF. See page 59.
page 49 for details.	7	Battery life. This icon indicates the charge remaining
2 Threshold level. The threshold setting controls		in the installed batteries. See page 27.
the audible level of threshold ‘hum’ during	8	Adjustment arrows. Pressing shift buttons next to
detecting. When the shift button next to the
		these arrows increases or decreases preset	5
adjustment arrow is pressed, the threshold hum
		settings.
increases or decreases. See page 50 for details.
			QUICKSTART
3 Depth indicator. The clear portion of the depth	9	Full screen icon. Selection enlarges display to fill
		screen. See page 48. This icon temporarily
indicator represents the approximate distance of
		changes to show the threshold level setting when
a target below the coil. The top of the indicator
		threshold is being adjusted.
represents the position of the coil and the bottom
represents 300mm (12 inches) from the coil. The	10	Target crosshair. Represents the detected
bar will be clear if the target is too far from the
		object’s properties on a two-dimensional scale of
coil or its depth cannot be accurately gauged.
		discrimination. See page 42-43.
4 Iron Mask. This shaded block indicates whether
IRON MASK function is ON or OFF.
See page 45.
			41
		QUICKSTART DISPLAY