6-3
Chapter 6
Installing Options
When you want to print on both sides of the paper , the duplex unit is
necessary.
NOTE
You may need to add more memory (an additional 8MB
recommended) to print on both sides of the paper.
- Take the duplex unit out of the shipping box.
- Remove the plastic bag and all shipping materials.
- Turn the printer off and then disconnect the power cord and inter-
face cable from the printer.
1. Remove the cover on the back-
side of the printer.
(Use a plus screwdriver.)
2. Attach the two duplex brackets
(included with the duplex unit) to
the backside of the print e r in the
holes provided for them.
Press down on them until you
hear a click.
3. Hook the duplex unit onto the
brackets and engage the connec-
tor and gear.
Secure it to the printer with two
screws.
(Use a plus screwdriver.)
Hold up the duplex unit with your
hand until you secure it with the
screws.
2. Installing the Duplex Unit
NOTE
Options6.frm 3 ページ ２００３年１１月１８日 火曜日 午前９時５２分