2-1
Chapter 2Setting Up
Selecting a Location for the Printer
A proper location helps to ensure that your printer provides you with
the long service life for which it is designed. Double check to make
sure that the location you select has the following characteristics.
• Choose a location that is well-ventilated.
• Make sure there is no chance of ammonia or other organic gas-
ses being generated in the area.
• The power outlet you plan to connect to for power should be
nearby and unobstructed.
• Make sure that the machine is not exposed to direct sunlight.
• Avoid areas in the direct air flow of air conditioners, heaters, or
ventilators, and areas subjected to temperature and humidity
extremes.
• Choose a firm, level surface where the printer will not be
exposed to strong vibrati on.
• Keep the printer aw ay from any objects that might block its heat
vents.
• Do not locate the printer near curtains or ot her combustible
objects.
• Choose an area where there is no possibility of the printer being
splashed with water or other liquids.
• Make sure that the surrounding area is clean, dry, and free of
dust.
Power Source
The power source requirements for this printer are as follows.
• Power source: 120V, 50-60Hz
• Voltage fluctuation: Within ± 10%
• Frequency fluctuation: Within ± 3Hz
1. Installation Precaution
Setting2.frm 1 ページ ２００３年１１月１８日 火曜日 午前９時５２分