3-15
Chapter 3Using Your Printer
TIMING
Sets the timing of “Busy to Ack” in the communication format
between the printer and PC. Basically, you don’t need to change
the setting. However , depending on the PC you are using, it may
not be able to support a proper communication between the
printer and PC. In such a case, change the setting after verifying
the PC specification.
A-B: Ack in Busy.
A-B-A: Ack while Busy.
B-A: Ack after Busy.
ADOBE PROTOCOL
This item appears only when PostS cr ipt is installed.
Standard: Tells the driver to send data to the printer in a ASCII
format.
Binary: Tells the driver to send data to the printer in a binary for-
mat.
TBCP: This allows you to change between ASCII and binary for-
mat by a particular control code.
TIME OUT
The T ime Out setting determines the time out period from the end
of the print job to the ready st ate. After the tim e out per iod, the
printer searches for next data from interface channel.
2. Understanding the Printer Menus
OperatW3.frm 15 ページ ２００３年１１月１８日 火曜日 午前９時５１分