Minolta 20 Grounding

2-2

Chapter 2Setting Up

NOTES

• Use a power source with minimal v oltage and frequency fluctu-

ation.

• Only use an outlet that is rated for the voltage capacity specif ied

for this printer.

• Be sure to plug the power cord all the way into the outlet. The

outlet should be located near the printer and easily accessible so

you can unplug the power cord immediately should any problem

occur.

• Make sure that the outlet is visible, and not hidden behind the

printer or any other object.

• If an y other electrical equipment is plugged into the same outlet,

make sure that the capacity of the outlet is not exceeded.

• If you use an extension cord, make sure its capacity is greater

than the power consumption of the printer. Usin g an extension

cord with a lower capacity creates the danger of fire.

• Never use a multiple socket to connect other appliances or

machines to the same outlet being used to power the printer.

Grounding

Always ground the printer to guard against the danger of electric

shock. To ground the printer, connect the grounding wire to the

ground terminal of the electrical outlet you are plugging into or to a

grounding contact that compl ies with local electrical standards in

your area.

Contact your Technical Representative if you are unable to make

grounding connection s yourself.

NOTE

1. Installation Precaution

Setting2.frm 2 ページ２００３年１１月１８日　火曜日　午前９時５２分