Minolta 20 5. Turning the Printer ON and OFF

2-10

Chapter 2Setting Up

Press the po wer switch to the  (ON)

position.

This printer will automatically go

into power save mode a given

period of time after the last activ-

ity.

See “System Menu” page 3-12.

When you turn the printer on, the following takes place.

1. All the LED’s light up and then go out.

2. Asterisks appears on the display from left to right.

3. The message SELF TEST appears on the display.

When the printer detects an error during an initialization or

diagnostic, an error massage appears on the display.

For details, see “Understanding Printer Messages” page 5-12.

4. The message WARMING UP appears on the display.

5. The message READY is displayed after warming up is com-

pleted.

This takes about 70 seconds. The printer is now ready to print.

Make sure that the printer is nothing

operating.

Press the power switch to the ❍

(OFF) position.

5. Turning the Printer ON and OFF

NOTE

Setting2.frm 10 ページ２００３年１１月１８日　火曜日　午前９時５２分