Troubleshooting 9
9-21
A duplex print job has
been sent to a printer that
is not equipped with a
duplex unit.
Disable the duplex setting and
resend the print job.
A paper format different
from the one set in the
printer driver has been fed
into the tray.
• Load paper with the format set in
the printer driver into the paper
feed tray (see page 6-8).

or

• Cancel the print job by pressing
and holding the control button for
about 10 seconds until all
indicators are on.
The wrong size paper has
been loaded into the
duplex unit.
Load the specified size of paper.
Paper misfeed at
tray 1. Remove the misfed sheet of paper
(see page 9-7).
Paper misfeed at
tray 2. Remove the misfed sheet of paper
(see page 9-9).
Paper misfeed at
tray 3. Remove the misfed sheet of paper,
see page 9-9.
Paper misfeed at the
manual feed unit. Remove the misfed sheet of pape
(see page 9-8).
Indicators Meaning Action