Unpacking, installing, and setting up the printer 2
2-13
Switching the printer on and off
CAUTION
Improper handling may result in damage to the printer!
ÜNever switch off the printer while a print job is in progress, the printer
is receiving data from the computer (flashing “Stand-by” indicator on
the control panel) or the printer is being reset.
ÜSwitch the power switch to “I” (ON)
in order to activate the printer.
The printer is ready for use after
approximately 23 seconds.
ÜSwitch the power switch to
“0” (OFF) in order to deactivate the
printer.
.
Saving energy makes sense!
After the printer has not received a print command for approximately
15 minutes, it automatically switc hes to POWER SAVE mode. If the
printer receives a new print job while it is in Power Save mode, or if the
top cover is opened, or if the control button is pressed, the printer
automatically starts its warm-up phase.