Troubleshooting 6CF2001P 6-3
Blank pages The imaging unit requires re-
placement. Contact your technical
representative.
Paper wrinkles during
printing. The paper being used is not
compatible with the printer. See “4.1 Paper
Specifications” for
compatible types of paper.
p.4-1
Paper is not loaded properly
in the tray. See “4.4 Loading Paper”.
p.4-7
The fusing unit requires re-
placement. Contact your technical
representative.
The print image is not fixed
and easily smears. The paper loaded in the tray
is damp. Replace the old paper with
fresh dry paper.
The paper being used is not
compatible with the printer. See “4.1 Paper
Specifications” for
compatible types of paper.
p.4-1
The fusing unit requires
replacement. Contact your technical
representative.
The printer takes too long to
output prints. The printer was in Energy
Saver mode when the print
command was issued.
If you do not want to use this
mode, disable it.
Contact your technical
representative.
The printer setting was for
color transparency
(transparency sheet) or thick
paper printing.
Wait a few moments.
Symptom Cause Action