Precautions 2
CF2001P 2-1
2 Precautions
2.1 Installation Precautions
Installation site
To ensure utmost safety and prevent possible malfunctions, install the
printer in a location that meets the following requirements.
-A location away from curtains, etc. that may catch fire and burn easily
-A location that is not exposed to water or other liquids
-A location free from direct sunlight
-A location out of the direct airflow of an air conditioner or heater, and
not exposed to extremely high or low temperatures
-A well-ventilated location
-A location that is not exposed to high humidity
-A location that is not extremely dusty
-A location not subjected to undue vibrations
-A stable and level location
-A location where ammonia or other organic gases are not generated
-A location that does not place the operator in the direct airflow of ex-
haust from the printer
-A location that is not near any kind of heating devices
Power source
The power source requirements are as follows.
GVoltage fluctuation: Maximum ±10%
(AC 127 V areas only: between -10% and +6%)
GFrequency fluctuation: Maximum ±0.3%
HUse a power source with as little voltage or frequency fluctuations as
possible.