Control Panel Messages 5
CF2001P 5-25
6Move the levers (one on each end
of the oil-coating unit) in the direc-
tion of the arrows and carefully pull
out the paper.
7While holding the levers on the ends
of the oil-coating unit, move the unit
back to its original position.
8Fully move the two lock release le-
vers for the oil-coating unit in the di-
rection of the arrows.
9Close the upper right-side door.
10Close the right-side door.
CAUTION
The area around the fusing unit is extremely hot.
§Touching anything other than the indicated levers around the fusing
unit may result in burns.
§If you get burnt, immediately cool the skin under cold water, and then
seek professional medical advice.