1Introduction
1-6 CF2001P
USER INSTRUCTIONS
FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
NOTE: This equipment has been tested and found to comply with the lim-
its for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference when the equipment is operated in a comm ercial environ-
ment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Oper-
ation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the
interference at his own expense.
WARNING: The design and production of this unit conform to FCC regu-
lations, and any changes or modifications must be registered with the
FCC and are subject to FCC control. Any changes made by the purchase r
or user without first contacting the manufacturer will be subject to penal ty
under FCC regulations.
This device must be used with a shielded interface (Parallel) cable and
shielded network (10/100BaseT) cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under FCC rules.
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 IS-
SUE 3) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la nor me NMB-0 03
du Canada.
CE Marking (Declaration of Conformity)
for Users of the European Union (EU)
This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the area of the European Union.
This device must be used with a shielded interface (Parallel) cable and
shielded network (10/100BaseT) cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under 89/336/EEC rules.