2-10
Getting to Know Your Copier Chapter 2
6. Auxiliary FunctionsAuxiliary Functions
The Panel Reset Key resets all control panel
settings to default settings including the number
of copies and zoom ratio.
* If the Duplexing Document Feeder is used, the
original present on the Original Glass will be
ejected out of the unit.
Useful Tips
•The Panel Reset Key enables you to cancel all
previous settings efficiently.
•To avoid miscopy, try to press this Key before
making any setting for your own copy job.
•Pressing this Key does not cancel the Interrupt
Mode.
The Auto Panel Reset Function is automatically
activated to return the copier to the default settings
5 min. after the copier has been touched last.
Useful Tip
The time for the copier to enter the Auto Panel
Reset Function can be selected from 1 to 9 min.
by using User’s Choice. Also, the Auto Panel
Reset function can be disabled by the User’s
Choice. ☞p.5-19
If the copier is shut down when it is not in use, it
takes the copier approx. 9 min. to complete the
warm-up cycle. Instead of turning the copier OFF,
it's a good idea to use the Energy Saver Mode.
This mode will minimize the time for the copier to
complete the warm-up cycle to about 60 sec.
• The Energy Saver Mode is automatically
activated a given period of time after the copier
has been touched last. The initial setting is 15
min.
• Pressing the Energy Saver Key sets the copier
into the Energy Saver Mode.
• To cancel the Energy Saver Mode, press any key
on the Control Panel, for instance, the Start Key.
Useful Tip
The time for the copier to enter the Energy Saver
Mode can be selected from 1 to 240 min. by
using User’s Choice. ☞p.5-19
Even during the copier warm-up, the copier is set
into the Auto Copy Start Function by loading the
originals onto the Duplexing Document Feeder
and pressing the Start Key.
This Function allows a copy process to be started
as soon as the copier completes warming up
(which takes approx. 9 min.).
The Interrupt Mode allows you to interrupt a
current job and run a different one. Pressing the
Interrupt Key once sets the copier into the
Interrupt Mode. Pressing the Key again cancels
the Interrupt Mode and returns to the previous
settings.
NOTES
•Pressing the Interrupt Key resets all settings to
the initial ones.
For details, see “Default Settings.” ☞p.5-1
•Some functions set before the Interrupt Mode
disable Interrupt copying. Further, when in the
Interrupt Mode, the copier defies setting of
some functions.
For more details, see “Function Combination
Matrix.” ☞p.8-9
•To cancel an Interrupt cycle, you need to press
the Interrupt key. The Panel Reset key or Auto
Panel Reset function does not serve this
purpose.