3-11
3. Basic Functions
Making Copies Chapter 3
Manual Bypass Copying
•Use the Manual Bypass to make copies on paper not loaded in any tray, or to copy onto OHP
transparencies or any other special paper.
•The setting of copy paper sizes is needed for manual bypass copying.
Types of Paper
•Plain Paper (20 lb to 24 lb)
•Thin Paper (20 lb)
•Thick Paper
Thick Paper 1 (24 lb to 34 lb), Thick Paper 2 (50 lb to 80 lb cover)
•OHP films (recommended brand)
Paper Size
•11
×17L to LetterC and 12×18L
•Postcard
•Max. Size: 11-3/4 ×17
•Minimum Size: 5-3/4 ×7-1/4
Capacity of the Manual Bypass Tray
•Thin Paper, Plain Paper, Thick Paper 1 ... Up to 90 sheets
•Plain Paper/Thin Paper (once-copied paper), Thick Paper 2 ... Up to 50 sheets
•OHP films ... Up to 40 sheets.
Place the original on the Original Glass.
Swing down the Manual Bypass Tray.
Insert a neat stack of copy paper into the
Manual Bypass Tray until it stops and slide
the Paper Guide Plates to the size of the copy
paper.
NOTES
•Load the OHP films so that the front side (on
which the white line is printed) faces up in the
direction as shown.
•Use only the recommended OHP films.
•Only Plain Paper can be used for 2-sided
copies.
•When inserting paper with one side previously
printed, load the paper stack so that the blank
side faces down.
•Make sure that the top level of the original
stack does not exceed the marking.

Copy Paper that Can be Used for Manual Bypass

Using the Manual Bypass Tray

1
2
1144O012AA
3
1144O013AA
1179O056AA