4-12
2. Color Adjust Mode (Professional)
Professional Way to Make Color Copies Chapter 4
Color Adjust Procedure (Professional: Other Than Color Balance)
Touch and select the item for
adjustment.
Touch .
(Ex.: When “Hue” is selected)
Position the image area of the original you
want to check for color in the Test Area on
the Glass.
NOTE
The size of paper should be A4C or LetterC for
test print.
Press the Start Key. This causes the copier to
output a sample copy showing seven images,
each representing a different level of
adjustment for the selected item.
Select the sample you like best, then touch
.
If you would like something in-between
(e.g., a hue level between +2 and +3), touch
. Then, touch or as
necessary to fine-tune the level.
NOTE
“Sharpness” does not permit fine-tuning.
Place the original in position again and press
the Start Key.
1Professional
1179P244CA
2Test Print
1179P245CA
3
1179P246CA
4
5OK
1179P247CA
Fine-Tune + –
1179P248CB
6