Connecting
your TV
10
(E)27HL85
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
•two coaxial cables
•one set of standard A/V cables
IN from ANT OUT to TV
VIDEO AUDIO
LR
IN
OUT
CH 3
CH 4
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable instead of a standard video
cable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
From Cable Box or Antenna
Stereo VCR
TV
TV
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video 1(page 25). Tune the VCR to channel 3 or 4 (the same
channel as the converter box output switch), and use the cable
converter box to change channels.
•three coaxial cables
•one set of standard A/V cables
Stereo VCR
From cable
TV
IN from ANT OUT to TV
VIDEO AUDIO
LR
IN
OUT
CH 3
CH 4
IN OUT
Cable converter box
TV
Note:
When you use a converter box with your TV,
the channel selection feature does not
operate.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an S-
video cable instead of a standard video cable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
#01E09-15_27HL85 3/16/05, 9:20 PM10
Black