Using the Mpeg NR feature | Mintek 27HL85 specification

Using the TVÕs Features

Using the MPEG NR feature

The MPEG NR (Noise Reduction) allows you to reduce visible interference caused by MPEG compression.

1.Press MENU, and then press x or • until the PICTURE menu appears.

2.Press y or z to highlight PICTURE SETTINGS, and then press

ENTER.

The PICTURE SETTINGS menu appears.

3.Press y or z to highlight MPEG NR.

PICTURE SETTINGS		2/2

BLACK STRETCH	ON
MPEG NR
MPEG NR	HIGH

CableClear DNR	AUTO

COLOR TEMPERATURE	MEDIUM

MENU BACK EXIT WATCH TV

4. Press x or • to select HIGH, MIDDLE, LOW, or OFF.

MPEG NR

MIDDLE

Using the CableClear¨ DNR feature

CableClear¨ DNR reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal or playing a video cassette or disc damaged by repeated use.

To turn on CableClear DNR:

1.Press MENU, and then press x or • until the PICTURE menu appears.

2.Press y or z to highlight PICTURE SETTINGS, and then press

ENTER.

The PICTURE SETTINGS menu appears.

3.Press y or z to highlight CableClear DNR.

PICTURE SETTINGS		2/2
BLACK STRETCH	OFF
MPEG NR	HIGH
CableClear DNR	AUTO
COLOR TEMPERATURE	MEDIUM

MENU BACK EXIT WATCH TV

4. Press x or • to select AUTO.

To turn off CableClear DNR:

Select OFF in step 4 above.

Note:

•This feature is only enabled for 480i signals.

TV/VIDEO RECALL POWER

INFO

1 2 3

4 5 6

			7	8	9
			+10		CHRTN
			100	0	ENT
			NU		G
			E	FAV	UI
		P	M	FAV	PIC	D
	O	P	FAVORITE		PIC	E
T	O				SI
					ZE

		MENU				MENU
		DVDMENU				yzx •
	ENTER			EXIT		R
N				EXIT		R
E
T		FAV			A
	E	FAV			A
	R			LE		ENTER
	R			C

TV		CH	VOL
CBL/SAT		CH	VOL
VCR
DVD
	POP DIRECT CH MUTE			SLEEP
TV/VCR		PAUSE	STOP	PLAY
		FREEZE	SOURCE	SPLIT
REW		FF	SKIP/SEARCH
Note:		SWAP	POP CH
CH SCAN		SWAP	POP CH
	REC			LIGHT

• This feature operates only for 480iand 576i input sources.

• When in ColorStream or HDMI mode, the words “CableClear DNR” will change to “DNR” in the menu.

• DNR is not selectable in HDMI mode.

42

Image 42

Mintek 27HL85 Using the Mpeg NR feature, Using the CableClear¨ DNR feature, Press x or to select HIGH, MIDDLE, LOW, or OFF

Contents

27HL85 Safety Precautions Dear Customer Important Safety Instructions Installation Service Care cont. from previous column Important notes about your LCD TV Introduction Introduction Supplied accessoriesCheck that you have the accessories and items shown Welcome to Toshiba Exploring your new TV Video Connecting your TV Connecting an antenna or cable TVChannels Connecting a VCR Connecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR Introduction Connecting yourTV DVD player with component video For Hdmi or DVI connection, see Connecting two VCRs Connecting a camcorder ¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector Connecting an HDMIª or a DVI device to the Hdmi input¥ one Hdmi cable type a connector ¥ one pair of standard analog audio cables Installing the remote control batteries Using the remote controlPreparing the remote control for use Remote control effective range Remote control codes For future reference, write down the codes you used Remote control codes Introduction Connecting YourTV Control Remote Control function key chart CLEAR/EXIT Learning about the remote control Connecting YourTV Control Setting up your TV Learning about the menu system Changing the on-screen display language Press x or to highlight your desired language Adding channels to the TVÕs memory Programming channels automatically Changing channels Adding and erasing channels manually Switching between two channels using Channel Return Using the TVÕs featuresAdjusting the channel settings Programming your favorite channels Connecting Labeling channels Viewing the wide-screen picture formats Selecting the picture size Theaterwide 1 picture size For 43 format programs Adjusting the Picture SIZE/POSITION Using the Auto Aspect feature Press y or z to highlight Auto AspectPress x or to select on Using the Gray screen function Selecting the gray level of the side panels Entering the PIN code Using the Locks menuUsing the V-CHIP menu If you cannot remember your PIN code TV Rating menu appears Press z or y to select an item OFF To release your setting UnlockTV Rating Independent rating system for broadcasters Repeat steps 2 and 3 to set the next item Mpaa Rating Independent rating system for movies Chip menu Locking channels Unlocking programs temporarilyRepeat steps 2 and 3 for other channels Repeat for other channels Locking the video inputs Changing the PIN code Adjusting the back light feature Adjusting the pictureSelecting the picture mode Press x or to select the mode you prefer Adjusting the picture quality Using the Black stretch feature Using the Mpeg NR feature Using the CableClear¨ DNR featurePress x or to select HIGH, MIDDLE, LOW, or OFF Selecting the color temperature Selecting the cinema mode Selecting the video input source Labeling the video input sources Using the closed caption feature Press x or to highlight C1-C4 or T1-T4¥ To view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timer Adjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Adjusting the sound quality Using the StableSound¨ featureTo turn off the StableSound feature Select OFF in above Understanding the auto power off feature Understanding the last mode memory featureDisplaying on-screen information Specifications Appendix Black box appears on the screen TroubleshootingAntenna T2, T3, or T4. Turn closed captioning OFF Limited United States Warranty Limited Canada Warranty Index Channel programming Toshiba ELECTROMEX, S.A. DE C.V