DVD player with component video | Mintek 27HL85 specification

Connecting your TV

Connecting a DVD player with ColorStream¨ (component video) and a VCR

This connection allows you to watch DVD, VCR, and TV programs, and record TV programs.

Your TV has ColorStream¨ (component video) inputs. Connecting your TV to a DVD player with component video (such as a Toshiba DVD player with ColorStream¨) can greatly enhance picture quality and realism.

ÐTo record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch.

ÐTo record a TV program while watching a DVD, tune the VCR to the channel to record, and select ColorStream HD on the TV (see ÒSelecting the video input sourceÓ on page 44).

You will need:

¥two coaxial cables

¥one set of standard A/V cables

¥one pair of standard audio cables

¥one set of component video cables

From

Antenna

Stereo VCR

	VIDEO AUDIO
	L	R
	IN from ANT OUT to TV	IN
	IN from ANT OUT to TV
	CH 3	OUT
	CH 4	OUT
	CH 4

TV

TV

Note:

For the highest possible picture quality, use component video cables (or an HDMI cable) between the TV and DVD player.

You can connect the component video cables to either set of ColorStream inputs on the TV.

For HDMI or DVI connection, see page 15.

The ColorStream HD and HDMI input can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems; however, a 1080i signal will provide the best picture performance.

If your DVD player is not compatible with component video, HDMI, or DVI, use the

S-video connections (plus the standard audio connections) instead (see page 11).

The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability.

						AUDIO
						OUT
	Y	PB	PR		L	L
	Y	PB	PR
S-VIDEO	COMPONENT VIDEO			VIDEO	R	R
S-VIDEO	COMPONENT VIDEO			VIDEO
				OUT

DVD player with component video

12

Image 12

Mintek 27HL85 owner manual DVD player with component video

Contents

27HL85 Safety Precautions Dear Customer Important Safety Instructions Installation Service Care cont. from previous column Important notes about your LCD TV Introduction Supplied accessories Check that you have the accessories and items shownIntroduction Welcome to Toshiba Exploring your new TV Video Connecting your TV Connecting an antenna or cable TVChannels Connecting a VCR Connecting a cable converter box and VCR Connecting a DVD player or satellite receiver and a VCR Introduction Connecting yourTV DVD player with component video For Hdmi or DVI connection, see Connecting two VCRs Connecting a camcorder Connecting an HDMIª or a DVI device to the Hdmi input ¥ one Hdmi cable type a connector¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector ¥ one pair of standard analog audio cables Using the remote control Preparing the remote control for useInstalling the remote control batteries Remote control effective range Remote control codes For future reference, write down the codes you used Remote control codes Introduction Connecting YourTV Control Remote Control function key chart CLEAR/EXIT Learning about the remote control Connecting YourTV Control Setting up your TV Learning about the menu system Changing the on-screen display language Press x or to highlight your desired language Adding channels to the TVÕs memory Programming channels automatically Changing channels Adding and erasing channels manually Using the TVÕs features Adjusting the channel settingsSwitching between two channels using Channel Return Programming your favorite channels Connecting Labeling channels Viewing the wide-screen picture formats Selecting the picture size Theaterwide 1 picture size For 43 format programs Adjusting the Picture SIZE/POSITION Using the Auto Aspect feature Press y or z to highlight Auto AspectPress x or to select on Using the Gray screen function Selecting the gray level of the side panels Using the Locks menu Using the V-CHIP menuEntering the PIN code If you cannot remember your PIN code OFF To release your setting Unlock TV Rating Independent rating system for broadcastersTV Rating menu appears Press z or y to select an item Repeat steps 2 and 3 to set the next item Mpaa Rating Independent rating system for movies Chip menu Locking channels Unlocking programs temporarilyRepeat steps 2 and 3 for other channels Repeat for other channels Locking the video inputs Changing the PIN code Adjusting the picture Selecting the picture modeAdjusting the back light feature Press x or to select the mode you prefer Adjusting the picture quality Using the Black stretch feature Using the Mpeg NR feature Using the CableClear¨ DNR featurePress x or to select HIGH, MIDDLE, LOW, or OFF Selecting the color temperature Selecting the cinema mode Selecting the video input source Labeling the video input sources Using the closed caption feature Press x or to highlight C1-C4 or T1-T4¥ To view text, highlight T1, T2, T3, or T4 Setting the sleep timer Setting the on timer Adjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Adjusting the sound quality Using the StableSound¨ featureTo turn off the StableSound feature Select OFF in above Understanding the auto power off feature Understanding the last mode memory featureDisplaying on-screen information Specifications Appendix Troubleshooting AntennaBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFF Limited United States Warranty Limited Canada Warranty Index Channel programming Toshiba ELECTROMEX, S.A. DE C.V