Changing channels | Mintek 27HL85 manual

Adding and erasing channels manually

After you have automatically programmed the active channels into the TVÕs channel memory, you can manually add or erase specific channels.

To manually add or erase channels:

1.Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons.

2.Press MENU, and then press x or • until the SET UP menu appears.

3.Press y or z to highlight ADD/ERASE.

SET UP	1/2
LANGUAGE	ENGLISH

TV/CABLE	TV

CH PROGRAM	ENTER

ADD/ERASE	ADD

CH LABELING	ENTER
VIDEO LABEL

MENU BACK EXIT WATCH TV

4.Press x or • to select ADD or ERASE, depending on the function you want to perform.

5.Repeat steps 1Ð4 for other channels you want to add or erase.

Changing channels

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0Ð9 and 100).

For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2, 5.

To change to the next programmed channel:

Press Channel y or z on the TV or remote control.

To use the program list to change to a specific programmed channel: Press ENTER to display the program list, and then press y or z to scroll through the channel list. When the desired channel number is highlighted, press ENTER.

VIDEO2

VIDEO1

ColorStreamHD ABCDEFG

HDMI

125

111105 Tentative

99

80

TV/VIDEO RECALL POWER

INFO

1 2 3

4 5 6

				7	8		9
				+10		CHRTN
			100		0		ENT
			NU				G
			E		FAV		UI
		P	M	ORITE	FAV		PIC	D
	O	P		ORITE			PIC		E
T	O						SI
T			FAV				SI
			FAV				ZE
					MENU
					DVDMENU
		ENTER					EXIT			R
N							EXIT			R
E
	T				FAV				A
		E			FAV				A
			R					LE
			R				C
	TV				CH	VOL
	CBL/SAT				CH	VOL
	VCR
	DVD
				POP DIRECT CH MUTE			SLEEP
TV/VCR					PAUSE	STOP	PLAY
					FREEZE SOURCE		SPLIT
		REW			FF	SKIP/SEARCH
CH SCAN					SWAP	POP CH
		REC					LIGHT

Channel

Number

MENU

yzx •

ENTER

Channel yz

25

E

F

S

Introduction

Connecting	yourTV


Usingthe	remotecontrol


Settingup	yourTV


UsingtheTVÕs	Features

Appendix

Index

Image 25

Mintek 27HL85 owner manual Changing channels, Adding and erasing channels manually

Contents

27HL85 Dear Customer Safety Precautions Installation Important Safety Instructions Care cont. from previous column Service Important notes about your LCD TV Introduction Check that you have the accessories and items shown Supplied accessoriesIntroduction Welcome to Toshiba Video Exploring your new TV Connecting an antenna or cable TV Connecting your TVChannels Connecting a cable converter box and VCR Connecting a VCR Introduction Connecting yourTV Connecting a DVD player or satellite receiver and a VCR DVD player with component video For Hdmi or DVI connection, see Connecting a camcorder Connecting two VCRs ¥ one Hdmi cable type a connector Connecting an HDMIª or a DVI device to the Hdmi input¥ one HDMIÐtoÐDVI adapter cable Hdmi type a connector ¥ one pair of standard analog audio cables Preparing the remote control for use Using the remote controlInstalling the remote control batteries Remote control effective range For future reference, write down the codes you used Remote control codes Remote control codes Introduction Connecting YourTV Control CLEAR/EXIT Remote Control function key chart Connecting YourTV Control Learning about the remote control Learning about the menu system Setting up your TV Press x or to highlight your desired language Changing the on-screen display language Programming channels automatically Adding channels to the TVÕs memory Adding and erasing channels manually Changing channels Adjusting the channel settings Using the TVÕs featuresSwitching between two channels using Channel Return Programming your favorite channels Connecting Labeling channels Selecting the picture size Viewing the wide-screen picture formats Theaterwide 1 picture size For 43 format programs Adjusting the Picture SIZE/POSITION Press y or z to highlight Auto Aspect Using the Auto Aspect featurePress x or to select on Selecting the gray level of the side panels Using the Gray screen function Using the V-CHIP menu Using the Locks menuEntering the PIN code If you cannot remember your PIN code TV Rating Independent rating system for broadcasters OFF To release your setting UnlockTV Rating menu appears Press z or y to select an item Repeat steps 2 and 3 to set the next item Chip menu Mpaa Rating Independent rating system for movies Unlocking programs temporarily Locking channelsRepeat steps 2 and 3 for other channels Repeat for other channels Changing the PIN code Locking the video inputs Selecting the picture mode Adjusting the pictureAdjusting the back light feature Press x or to select the mode you prefer Using the Black stretch feature Adjusting the picture quality Using the CableClear¨ DNR feature Using the Mpeg NR featurePress x or to select HIGH, MIDDLE, LOW, or OFF Selecting the cinema mode Selecting the color temperature Labeling the video input sources Selecting the video input source Press x or to highlight C1-C4 or T1-T4 Using the closed caption feature¥ To view text, highlight T1, T2, T3, or T4 Setting the on timer Setting the sleep timer Muting the sound Adjusting the soundSelecting stereo/SAP broadcasts Using the WOWª surround sound feature Using the StableSound¨ feature Adjusting the sound qualityTo turn off the StableSound feature Select OFF in above Understanding the last mode memory feature Understanding the auto power off featureDisplaying on-screen information Appendix Specifications Antenna TroubleshootingBlack box appears on the screen T2, T3, or T4. Turn closed captioning OFF Limited United States Warranty Limited Canada Warranty Channel programming Index Toshiba ELECTROMEX, S.A. DE C.V