Mitel 5005 Using The 5005 IP Phone

User Guide

- 4 -

Initializing And Registering The Phone

IP phone initialization occurs automatically when the set is con nected to the network.

CAUTION: During the initialization process, the phone may download crucial "boot" data from

the TFTP server on the network. This will be indicated by the display screen showing DO NOT

POWER DOWN and the light indicator (LED) flashing. DO NOT POWER DOWN OR TURN OFF

THE PHONE DURING THIS PROCESS! If the phone is powered down at this point, "boot" data

is likely to be corrupted and the phone will not boot up properly when powered on.

All IP sets are required to complete PIN registration. This registrat ion results in a MAC address being

assigned in the MAC Address Assignment form. The 5005 IP phone will reg ister with the 3100 ICP

automatically.

Once the phone is registered, it can be moved to any switched 10/100bas eT port that is reachable by

the 3100 ICP, DHCP and TFTP servers servicing the IP phones so long as the ph one is locally

powered. The phone will automatically boot and re-register with the 3 100 ICP system whenever it is

moved.

Note: Initializing and registering the 5005 IP phone is a procedure t hat should only be carried out

either by a trained technician or your System Administrator. Please cons ult with your System

Administrator before performing any procedures that may have an ad verse effect on the

performance of the phone.

Using The 5005 IP Phone

About Using The 5005 IP Phone

The 5005 IP Phone is a single-port telephone designed for use with a M itel Networks 3100 Integrated

Communications Platform (ICP) integrated with your organization’s network.