5312/5324 IP Phones User Guide

NA–Intredirects internal calls after several rings if you don't answer.

NA–Extredirects external calls after several rings if you don't answer.

Note: For information about "I'm Here?", see Call Forward – Remote. To program Call Forward:

1.Press (MENU).

2.Press # or the No softkey until "Call Forwarding?" appears.

3.Press * or the Yes softkey .

4.Press # or the Next softkey until the type of Call Forward that you want to set up appears (see above).

5.On a 5324 IP Phone only, press * or the Review softkey.

6.If a number is already programmed, press * or the Change softkey .

7.Press * or the Program softkey .

8.Dial the destination number.

If you make an error while dialing, press * or the Å softkey to correct errors.

9.Press (DOWN) or the Save softkey.

To turn Call Forward on and off (once it has been programmed):

1.Press (MENU).

2.Press # or the No softkey until "Call Forwarding?" appears.

3.Press * or the Yes softkey .

4.Press # or the Next softkey until the type of Call Forward appears. .

5.Do one of the following:

On a 5312 IP Phone, press * (Change) and then press # (TurnOff/TurnOn)

On a 5324 IP Phone, press the Review softkey. Press the Change softkey.

To turn Call Forward on, press the TurnOn softkey, or, to turn Call Forward off, press the TurnOff softkey.

- 20 -

Page 28
Image 28
Mitel 5312 IP manual 5312/5324 IP Phones User Guide