Manuals / Brands / TV and Video / Satellite TV System / Mitsubishi / TV and Video / Satellite TV System

Mitsubishi DM 7025 2.Installation, 2.1Turning the device on, 3. Start wizard, 1.1 Safety instructions, 4.1 Turning your Dreambox on and off

1 91

Download 91 pages, 8.83 Mb

U s e r M a n u a l D r e a m b o x D M 7 0 2 5

english

2.Installation

2.1Turning the device on

-Place the batteries inside the battery compartment of the remote control keeping in mind the right polarity.

-Before using the Dreambox, please read the safety instructions (See chapter 1.1 Safety instructions)

-Connect the LNB or antenna with a coaxial cable to LNB1/2 in or Antenna in at your Dreambox.

See chapter 1.3.2 Explanation rear panel.

-Connect the Dreambox with a Scart cable to your television screen and if available connect your DVD Player or VCR to the VCR Scart of the Dreambox.

-Plug in the power cable into the Dreambox and then into a 110V/60Hz or 230V/50Hz power socket.

-If you are using a switchable power socket please shutdown your Dreambox into deep standby before switching off the power socket. See chapter 4.1 Turning your Dreambox on and off

-If you switch on your Dreambox for the first time, you will see the setup wizard.

The setup wizard will guide you through the first time installation. Follow the instructions on the screen. See chapter 3. Start wizard.

-Please note that the factory setting for the video format is CVBS (FBAS).

- 19 -

Contents

User Manual 1. Before initial operation of the receiver 2. Installation 3. Start wizard 4. Basic operation 5. Electronic Program Guide - EPG 6. Edit the channellist 7. Hard disk operation Picture-in-Picture mode (PiP) 10. Setup 11. Service searching System information TV-Modesetup Service Slip 1.Before initial operation of the receiver 1.1 Safety instructions ATTENTION Modifications and changes to the Dreambox lead to loss of warranty if not performed and documented by skilled personal Shut down Additional safety instructions Disposal instructions 1.2Packaging contents 1.3Views Front panel Rear panel 1.3.1Explanation Front Panel CI-Slot Compact Flash Slot Smartcard reader Remote control sensor Channel up/down 1.3.2Explanation rear panel Mains switch Mains connection Analog audio out (RCA) Video out (Composite) TV Scart Modem port (optional) Digital audio out (Toslink) Mini DIN Port 0 / 12V out Serial port (RS232C, Sub-D, 9-pol.) 1.4Remote control Important notes about operation Explanation remote control buttons MUTE-Button Volume +/- Buttons EXIT-Button Bouquet +/- Buttons INFO-Button down MENU-Button AUDIO-Button red TV-Button HELP-Button TEXT-Button 2.Installation 2.1Turning the device on 3.Start wizard 3.1Language selection 3.2Tuner setup 3.3Service scan Finalizing the basic setup 4.Basic operation 4.1Turning your Dreambox on and off 4.2Service selection 4.3Changing channel using the service list 4.4Controlling the volume 4.5Changing the audio track 4.6Sub Services 4.7TV/Radio switching 4.8Teletext 4.9Infobar 5.Electronic Program Guide - EPG 5.1Single-EPG 5.2Multi-EPG 5.2.1 Time/Date Input 6.Edit the channellist 6.1Adding a bouquet 6.2Add a service to favourites 6.3Adding multiple services to a bouquet 6.4Remove a service from favourites 6.5Moving a service to favourites 6.6Adding a marker to favourites 7.Hard disk operation 7.1Mounting guidelines Parts list Action: Page Page Page Page 7.2Management 7.3Recording 7.3.1 Instant recording 7.3.2 Stop recording 7.3.3Recording by timer Manual programming Programming via EPG 7.3.4Timeshift 7.4Watch a recording Green Blue Red Yellow TV-Button 7.5Delete a recording 8.Teletext left right 9.Picture-in-Picturemode (PiP) 10.Setup 10.1Language 10.2Customize Page 10.3Setting the time zone 10.4A/V Settings 4:3 Letterbox (Standard) 4:3 Panscan 16:9 16:9 always 16:10 Letterbox and 16:10 Panscan 10.5RF output 10.6LCD Setup 10.7Network Attention: Activate the network: 10.8Common Interface 11.Service searching 11.1DVB-STuner configuration 11.1.1Single satellite – direct connection (DVB-S) 11.1.2Two satellites via Toneburst A/B (DVB-S) 11.1.3Two satellites via DiSEqC A/B (DVB-S) 11.1.4Four satellites via DiSEqC A/B/C/D (DVB-S) 11.1.5Stab Positioner using USALS (DVB-S) 11.1.6Tuner 2 setup (DVB-S) 11.2DVB-CTuner configuration 11.2.1Tuner 2 setup (DVB-C) 11.3DVB-TTuner configuration 11.3.1Tuner 2 setup (DVB-T) 11.4Automatic scan Page 11.5Manual scan 12.Systeminformation 12.1Service 12.2About (Hard- and Software) 13. Troubleshooting 14.TV-Modesetup 14.1Programming the remote control 14.2Device list Page Page Page Page 15.Technical data Common-Interface: Video decoder: Audio decoder: Output analog: Output digital: USB: UDMA66 IDE Interface: LNB power and polarization per tuner: Count of active satellite position: Power consumption: 16.Contact & support information 17.Copyright notes 17.1GNU GENERAL PUBLIC LICENSE Preamble TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION Page END OF TERMS AND CONDITIONS 18.Menu overview