U s e r M a n u a l D r e a m b o x D M 7 0 2 5

english

11.1.4Four satellites via DiSEqC A/B/C/D (DVB-S)

Use this type of configuration if you want to receive four satellites from one Single Universal or Twin Universal LNB for four or eight parties. It does not matter if you use one or two dishes to achieve this.

In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax cabled to the satellite receivers (Dreamboxes) in your household.

Please read the section 11.1 DVB-S configuration to learn how to get into this menu.

The “Satconfig” menu will open up.

Use the up/down-Buttonsto navigate to the “DiSEqC-Mode” option and use the left/right- Buttons to select “DiSEqC A/B/C/D”.

For Ports A, B, C and D select the desired satellites just as described in the Single satellite – direct connection section.

Make sure you know which satellite is connected to which input on the Toneburst switch.

If you do not find any services in the transponder scan later, exchange the two satellites in this list and try again.

Press the OK-Buttonto save your settings.

- 66 -