U s e r M a n u a l D r e a m b o x D M 7 0 2 5

english

10.6LCD Setup

If no OSD menu is visible on your screen, press the Menu-Buttonto open the main OSD menu. Navigate to the option “Setup” and press the OK-Buttonto select.

Navigate to the option “System” and press the OK-

Button.

The “System” menu will open up.

Navigate to the option “LCD Setup…” and press the

OK-Button.

Using the Navigation-Buttons left and right you can set the brightness and contrast of the LCD.

“Standby” set the brightness value for standby.

If “Invert” is set to “Yes” the polarity of the LCD will change.

All changes will take effect immediately.

Press the green Options-Buttonto save the setting or the red Options-Buttonto discard them.

You are taken back to the “System“ menu.

- 58 -