5. TV Menus 53
Lock Menu, continued
Time
Blocks all use of the TV during the time period you specif y. You must enter a pass code to use the TV when the time
lock is in effect.
Lock by Time
On, Off Enable or disab le Lock by Time.
Lock Time,
Unlock Time
To set the lock and unlock times:
1. Highlight the hour digits for the Lock Tim e.
2. Press rep eatedly to change the hour and associated AM/PM indicator. To move quickly
through the numbers, just press and hold.
3. Press
ENTER
to set the hour and highlight the minutes.
4. With the minutes highlighted, press repeatedly to change the minutes. To move quickly
through the numbers, just press and hold.
5. Highlight the Unlock Tim e digits and set the time as described above.
Note: T
o make Lock by Time active 24 hours a day, make Start Time and Stop Time the same.
Other Menu Options (alternate rat ing system)
This TV can recognize new rating systems that may come into effect in the f uture. The Other option remains grayed
out until the TV receives a signal using an alternate rating system. Such a lternate rating systems will apply only to
digital programming received on the
ANT 1
and
ANT 2
inputs.
Option Name and Description
Lock On, Off Enable or disable progra m blocking.
System Name
The rating system available for the channel
Group Rating groups available in the rating system shown on the screen. Rating groups are define d by
the rating system in effect.
Rating Rating restrictions available in the selected rating system and group. Highlight the r ating and
press
ENTER
to check (block) or uncheck (allow) rated content.
Control Panel
On, Off On locks and Off unlocks the buttons on the TV’s control panel. Use this option if small c hildren
may try to press TV buttons.
If the remote control is unavailable, use the TV’s control panel to • release the Control Panel
Lock. Press and hold the
MENU
button for over eight seconds.
If the TV is powered off, release the lock as described ab ove. The TV will power on.•
To reactivate the lock, you must return to this menu and change the setting to • On.