Mitsubishi Electronics DATA PROJECTOR E-62, Replacing the Lamp Cartridge, Remove the lamp cover

Replacing the Lamp Cartridge

Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.

1 Unplug the power cord.

2 Turn the projector upside-down.

3 Remove the lamp cover.

(1)Turn the lamp cover’s set screw counterclockwise and loosen until the screw turns freely. (The screw does not come off.)

(2)Open the lamp cover a little, then pull it in the direc- tion of the arrow and remove it.

4 Remove the lamp cartridge.

(1)Turn the lamp cartridge’s screw counterclockwise and loosen them until the screw turn freely. (The screw do not come off.)

(2)Grasp the lamp cartridge’s handle and pull upward to remove the lamp cartridge.

E-62