Mitsubishi Electronics DATA PROJECTOR user manual E-32, General Operation, L-CLICK button on back

Models: DATA PROJECTOR

1 68
Download 68 pages 19.97 Kb
Page 33
Image 33
Connecting the computer and projector

General Operation

Performing Mouse Operations on the Computer with the Remote Control Unit

When a computer and the projector are connected, mouse operations can be performed on the computer using the projector’s remote control unit. When projecting images from the computer, the projector can be operated and mouse operations on the computer performed with the same remote control unit, making for efficient presentations.

Connecting the computer and projector

Use the USB cable included with the projector to connect the computer’s USB (type A) connector to the projector’s MOUSE connector.

Note:

*Be sure to plug the cable in securely.

*Depending on the type of connection, the computer’s operating system, etc., it may be necessary to change settings or restart the com- puter after making the connections.

USB connector

USB cable (mini B to A type) (Supplied item)

Functions of the mouse function buttons

When operating, point the remote control unit’s transmitter towards the remote control sensor on the projector.

STANDBYLASER

RGB VIDEO AUTO

MENUQUICK

Q

R-CLICK/

ENTERCANCEL

FREEZE MUTE TIMER

1 2

VOL ZOOM

L-CLICK button (on back)

Press this to perform the left-click operation.

JOG buttons

These move the computer’s pointer in the corresponding direction.

R-CLICK button

Press this to perform the right-click operation.

INFORMATION

The R-CLICK/CANCEL button is used for both the projector and mouse func- tion. When the R-CLICK/CANCEL button is pressed while a menu is open, the menu is closed.

3 4

Note:

Connections with USB Cables

*For PC/AT compatible computers, this function cannot be used with operating systems other than Windows 98SE, Me, 2000 and XP. For Macintosh computers, this function cannot be used with operating systems other than OS 9 and later.

*When the cable is disconnected and then reconnected to the USB port of the personal computer or the MOUSE connector of the projector, allow at least 5 seconds before reconnecting. Do not repeatedly disconnect and reconnect the cable in a momentary fashion. The personal computer may not be able to correctly identify the projector as a result.

*The supplied USB cable is a dedicated cable for this projector. There is no guaranty that it will work in connections with other USB equipment.

*This function may not work with some computers.

E-32

Page 33
Image 33
Mitsubishi Electronics DATA PROJECTOR E-32, General Operation, Connecting the computer and projector, JOG buttons