step1. Set the camera number to be copied.
•The button function changes between “All Off” and “All On” each time you select this button. You can switch on and off for all the cameras easily by using this button.
•The picture is not copied when there is no recorded picture of the set camera number or time.
step2. Select “Other settings” and then set the detailed settings.
From Main: Sets the area which contains the data to be copied. The available setting items are “Normal,” “Alarm,” and “LPA.”
To Copy 2: Sets the group name to where the data is copied. The available setting items are “SerialBus,” “NAS,” “SCSI,” and “DVD/CD.” Copy Data: Sets the data area to be copied. The available setting items are “Alarm” and “All.” Overwrite: Selects whether or not to overwrite the existed data.
Auto Eject: Selects whether to eject media (CD/ DVD) automatically when the copy is over.
FIFO Overwrite: Selects whether to repeat copying from the start point of the media by overwriting the existed data, or to stop copying when the capacity of the media becomes full during copying. This setting is available only when the copy destination is HDD or NAS.
•“Alarm” appears for “From Main” when “Alarm Recording Area” (System Menu
Memory 
Data Management Setting for Main Memory 
Change Partition Setting) is set to other than “0 %.”
•“LPA” appears for “From Main” when “Long 
Memory
Data Management Setting for Main Memory
Change Partition Setting) is set to other than “0 %.”
•When copying the data to DVD and setting “Overwrite” to “On,” the unit clears the existed data of the disk before overwriting with new data. Note that clearing the data takes about 30 to 40 minutes.
step3. Set the start time of copy.
Start: Sets the start point of copy.
Continue: Starts copying from the end point of the previous copy.
•To set the start point using the book mark, select “Bookmark” and then select the desired book mark number.
•To copy from the oldest recording time, select “Copy Start Time.”
step4. Select “Execute.”
•The copy starts.
•To stop copy manually, select “Cancel” in the screen of <Copy Data to Copy 2 Drive>. The data which has been copied before cancelling is copied.
•When the copy is performed during recording, the picture of the recording start and end points may not be recorded.
•When the recording data of the main device which is being copied is overwritten or about to be overwritten, copy is stopped. Be careful for the copy which requires long time such as overwriting copy of DVD.
•The progress bar of copy is not displayed for copy 2.
•The picture data is processed in 2 MB unit. Therefore the data is copied in 2 MB unit from the start point of the designated range when copying.
Copying the data of this unit to a video cassette
This function is used to copy the data of this unit to a video cassette using an analogue video cassette recorder. Data can be copied even when the unit is in recording mode. For the recording operation, see the instruction manual for the analogue video cassette recorder used.
step1. [Analogue video cassette recorder] Prepare the VCR for recording.
•Set the input source of the VCR to the external input.
step2. [This unit] Display the picture in its format (single/ split) that you want to record.
step3. [This unit] If needed, use the search function to display the start position of copy.
step4. [Analogue video cassette recorder] Start recording. step5. [This unit] Press the PLAY button to start playback.
step6. To stop copying, press the STOP button on this unit first. And then, stop the recording on the analogue video cassette recorder.
•Only the picture displayed on the monitor screen can be copied to the video cassette.
•The warning is displayed when the copied range exceeds the available capacity of the device to be copied when “FIFO Overwrite” is set to “Off” and copy destination is HDD. In this case, set the copy setting again with narrower copy range or use a copy device with larger capacity.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic operations
21
