Mitsubishi Electronics LDT37IV (BH544) manual For long life use of Public Display, English

	Information of status for COOLING FAN,	English
	BRIGHTNESS and TEMPERATURE.
HEAT STATUS	COOLING FAN comes to run when inside
	temperature is over a guaranteed limit.
	In this case warning is displayed on the screen.
	Adjusts the delay time from "standby" to
POWER ON DELAY	"power on" mode.
	"POWER ON DELAY" time is selectable from
	OFF, 2sec, 4sec, 6sec, 8sec, 10sec, 20sec,
	30sec, 40sec and 50sec.
DATE AND TIME	Adjusts the current date and time for internal
	clock.
	You should set this function when you use
	"SCHEDULE".
	Programs the monitor's working schedule.
	Schedule the power on and power off with
SCHEDULE	hour and a day of the week. Also sets the
	input port.
	This OSD can't remove except EXIT.
	(see "NOTE 2" on page 28 for further
	information)
	Selects the kind of DVI-D equipment which is
	connected RGB1.
DVI-MODE	Select "DVI-PC" when PC or other computer
	equipment is connected.
*:INPUT RGB1 only	Select "DVI-HD" when DVD player, which has
	DVI-D output, is connected.
	Selecting ADVANCED OPTION reset allows
ADVANCED	you to reset all OSD settings from ADVANCED
	OPTION settings, except for DATE & TIME.
OPTION RESET	Select "YES" and press "SET" button to restore
	the factory preset data.
	Press "EXIT" button to cancel and then return
	the previous menu.

English

NOTE 1: IMAGE PERSISTENCE

Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Please set “POWER SAVE”, “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE” functions to further reduce the risk of Image persistence.

For long life use of Public Display

< Image Sticking of LCD Panel >

When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and residual or "ghost" image of previous image may be observed. (Image Persistence)

Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated along the displayed image, and it is observed permanently. (Image Sticking)

English-27