Mitsubishi Electronics LT-52153, LT-40153 16 2 TV Connections, Cable Management, Connection Types

16 2 TV Connections

Before You Begin

Auto Input/Auto Output Sensing

The TV’s Auto Sensing feature automatically recognizes most connections and prompts you to identify the type of device connected. See page 13 for more on Auto Sensing.

Connection Types

Use the connection types available on your input devices that will give the best video quality. For example, choose HDMI over component video, and choose component video over composite video.

Picture Quality

For best picture quality, route signals directly from the input device to the TV whenever possible.

Surround Sound

For best surround sound audio quality, route audio or HDMI cables from the source device directly to your TV (for Sound Projector) or directly to your A/V receiver if using an external sound system.

IMPORTANT

Accessory items such as cables, adapters, splitters, or combiners required for TV connections are not supplied with the TV. These items are available at most electronics stores.

Cable Management

Install the cable tie (supplied) in one of the four mounting holes on the back.

Lock the cable tie in place by pushing the end into the mounting hole.

1

2

To remove the cable tie, squeeze the side tabs and pull out.

Sample cable routing. Secure the cable bundle with the release tab facing out.

Press the release tab to loosen the cable tie.