Mitsubishi Electronics LT-46151 Case 2 NetCommand setup for controlling A/V receiver switching

6. NetCommand Control of an A/V Receiver 61

Setting Up A/V Receiver Control, continued

Case 2: Automatic A/V Receiver Switching to a Surround Sound Device

Note: Use this setup to send digital surround sound from a source device directly to your external sound system. For non-surround sound source devices, Mitsubishi recommends using the setup for Case 1, in which audio is sent through the TV.

A device can send digital surround sound such as Dolby Digital or DTS directly to the A/V receiver. The device might be a DVD player, cable box, or satellite receiver, and could have HDMI output. A DVD player is used in this example.

Your setup may include additional devices with digital surround sound connected directly to the A/V receiver. These devices might be a DVD player plus a cable box or satellite receiver.

Case 2: NetCommand setup for controlling A/V receiver switching

to the A/V receiver’s DVD input. The list contains connected inputs with names assigned during Auto Input Sensing.

DVD Player	digital surround sound
with
Digital
Surround	video	TV
Sound

DVD audio

input

A/V Receiver

3.	While the text DVD is flashing, press and hold the
	DVD INPUT key on the A/V receiver’s remote control.
4.	When a check appears next to DVD, release the
	DVD INPUT key.
	• If the text stops flashing before the check mark
	appears, repeat this step.

Case 2: A/V receiver audio from a device providing surround sound directly to the A/V receiver

1.In the Inputs > AVR menu, press to highlight the name of the A/V receiver input to control. In this example, it is the DVD input.

2.Press ENTER on the TV’s remote control.

• To erase the IR code just “learned,” press

CANCEL while the name is highlighted.

5. If finished, highlight EXIT and press ENTER or

continue to set up additional A/V receiver audio

sources.