Basic connections
This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output.
Important:
•Make sure that your equipment is turned off before connection.
•Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
•If connected units are set too close to one another, the image may be affected.
•Refer to the owner's guide of each component for details of connections.
Projector + AV equipment
Important:
•Match the color of video and audio plugs on the AV cable with the connections.
•
to audio input 1
to
input 2
to video input 1
to audio input 2
to | S- | video | Connect either one of these. | ||||||
input | 2 |
|
|
|
|
| |||
|
|
|
| to vid | eo | input 2 |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect either one of these.
to audio | to | to audio to | to video | |
output | output | output | output output | output |
DVD player, others | VCR, others |
| ||
Projector + DVD player or HDTV decoder
Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector, connect to COMPUTER 1 IN or COMPUTER 2 IN of the projector. In this case, set “ Y, CB, CR” for COMPUTER INPUT setting in SIGNAL menu.
Connecting with DVD player
DVD player generally has SDTV system compo- DVD player or HDTV decoder nent video output (Y, CB, CR) terminal. When con-
necting the projector with DVD player, the COM- PUTER INPUT in the SIGNAL setting menu be- comes [Y, CB, CR] automatically.
BNC - RCA connector (optional)
Connecting with HDTV decoder
Many HDTV decoders have HDTV system compo- nent video output (Y, PB, PR) terminal. When con- necting the projector with this type of HDTV de- coder, the COMPUTER INPUT in the SIGNAL setting menu becomes [Y, PB, PR] automatically.
YCB(PB) CR(PR) No connection
G | B | R | HD/CS | VD |
to COMPUTER
1 IN
•Y, PB, PR is an example of the terminal names for a HDTV decoder.
•The terminal name is different depending on the connected equipment.
•Use mini
•Some DVD players may not project the image correctly.
•When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in the SIGNAL setting menu.
EN – 10
