Mitsubishi Electronics LVP-XD10U Image sub-page Only available when the input signal is PC

B Image Page

Select the Image sub-page and the first item, "Auto Resize" will be highlighted. There are five items on this page: Auto Resize, H. Phase, H. Size, H. Position, and V. Position (Fig. 22).

If an AV box is attached and the input is from Video instead of PC, another different Image sub-page including Image Ratio, System ,Color and Tint will come out as seen in Figure 23.

Figure 22 Image sub-page – Only available when the input signal is PC

Figure 23 Image sub-page – Only available when the input signal is from video, S-video

Auto Resize

H.Phase

H. Size

H.Position

V. Position

Setting effects

When Auto Resize is on, the projector determines the best fit of the image to the screen.

If flicker occurs on a projected image, users may try to adjust the H. Phase manually.

If the projected image is too wide or too narrow for the screen, users may turn Auto Image off and adjust the H. Size manually to fit the screen size.

(move the image left) (move the image right)

The Auto Image should be turned off to activate the H. Position item. Position adjustments are saved when the projector is power off.

(move the image down) (move the image up)

Position adjustments are saved when the projector is power off.

English 17