Image Ratio | 4:3 (Normal) | 16:9 (Wide) |
System To select the input video system standard. When an AV box is attached, the projector will automatically detect the video system. Users also can select desired video systems. When selecting system, the projector will detect the selected system simultaneously, and the OSD will still exit on the screen. The default setting for System is "Auto" (See Figure 23).
Color
(Less) |
|
|
| (More) |
|
|
| ||
|
Tint
(Red)
(Green) | Source is Video or |
|
*Tint may not be adjusted with PAL/SECAM video signal input.
C Control Page
When users go into the Control
Figure 24 Control sub-page
Setting effects
Reset To reset display, image and control settings to factory settings.
Language To select the OSD menu language. 7 languages are supported: English, French, Dutch, Italian, German, Spanish and Simplified Chinese. (See Figure 24).
Mirror To select Normal projection,
Auto Off To set the time to turn the power off after the start up screen is displayed and no signal is detected or sync is out of range. To select, use “W”
*Default setting is 0 (stop).
Lamp The usage time of lamp will display on this item. And you can reset the usage time of lamp from this item after you change a new lamp. ( See page 15 )
18English