C Troubleshooting
PROBLEMS |
| TRY THESE SOLUTIONS |
|
|
|
NO POWER | y | Plug the power cord into the AC Inlet. |
| y Plug the power cord into the power Inlet. | |
| y | Wait two minutes after the projector has been turned off |
|
| before turning the projector back on. |
|
|
|
NO PICTURE | y | Check that you have selected the proper input source. |
| y Ensure all cables are connected properly. | |
| y Adjust the brightness and contrast. | |
| y Remove the lens cap. | |
| y Is the POWER indictor flashing? | |
| y Is the STATUS Indicator flashing? | |
|
|
|
IMAGE ISN’T | y | Reposition the unit to improve its angle on the screen. |
SQUARE ON THE | y | Is the vertical offset properly corrected using the keystone |
SCREEN |
| function? |
|
|
|
POOR COLOR | y | Select the correct video system. |
| y Adjust brightness, contrast, or saturation. | |
|
|
|
IMAGE IS BLURRED | y | Adjust the focus. |
| y Reposition the unit to improve its screen angle. | |
| y Ensure the distance between the unit and screen is within | |
|
| the adjustment range of the lens. |
|
|
|
REMOTE CONTROL | y | Replace the batteries with new ones. |
DOESN’T WORK | y | Make sure there is no obstacle between the remote control |
|
| and the unit. |
| y Stand within 10 meters (32 feet) of the unit. | |
| y | Make sure nothing is blocking the receiver on the control |
|
| pad. |
NO SOUND | y | Check audio cable connection from audio input source. |
| y | Adjust audio source. |
| y Press “Volume” (+) button. | |
| y | Press “Mute” button. |
|
|
|
22English
