Other Correspondent Remote Functions and Messages
OSD
Source
Freeze
Mute
Volume
Magnify
Laser
Disk Pad
Drag
Blank
FUNCTION
The selected source will be displayed at the bottom right of the screen for 3 seconds after selecting the source. (PC, VIDEO,
The image will be frozen when the "Freeze" button is pressed. A mark appears at the lower right of the screen for 3 seconds during the freeze function. Furthermore, a "X" mark appears at the lower right of the screen for 3 seconds when freeze is released. "Freeze" is released when the source button or the "Freeze" button is pressed again.
Press the "Mute" button and the sound will be muted. There will be an OSD message as shown below:
Press Mute again or the volume +/- buttons to turn off the mute.
Press volume + or - buttons to adjust the volume. The OSD message below will appear: (The message will disappear automatically 3 seconds after the volume is adjusted.)
By pressing the magnify "+" button, the center of the picture can be magnified. Press the button again, and the image will be further magnified (to
amaximum of 4X). Press the magnify
Press this button to generate the laser beam.
If users connect the PS2 (ADB) mouse cable on the projector with the PC/Notebook (Macintosh/ Powerbook) mouse port, the disk pad will be able to function as a PC/Notebook mouse. When an image has been magnified, press the “Disk Pad” button to move around the display area (the mouse function is not available when magnify function is on).
This button is a toggle switch to turn on/off the drag function of the remote mouse.
Press this button to activate or release the blank function.
20English
