For Packaged Air Conditioner
Wireless Remote Controller |
|
Installation Manual
This installation manual contains only the description of how to install the wireless remote controller unit
For your safety, first be sure to read “ 1 Safety Precautions ” described below thoroughly and then install the wireless remote controller unit PAR- FL32MA correctly.
1
Safety Precautions
●The following two symbols are used to denote dangers that may be caused by incorrect use and their degree:
WARNING | This symbol denotes what could lead to serious injury or death if you misuse the |
|
|
CAUTION | This symbol denotes what could lead to a personal injury or damage to your property if you misuse the |
|
|
●After reading this installation manual, keep it in a place where the final user can see it anytime.
When someone moves, repairs or uses the
WARNING
Ask your dealer or technical representative to install the unit.
Any deficiency caused by your own installation may result in an electric shock or fire.
Install in a place which is strong enough to withstand the weight of the
Any lack of strength may cause the
Never modify or repair the
Any deficiency caused by your modification or repair may result in an electric shock or fire.
Consult with your dealer about repairs.
Ensure that installation work is done correctly following this installation manual.
Any deficiency caused by installation may result in an electric shock or fire.
All electrical work must be performed by a licensed technician, according to local regulations and the instructions given in this manual.
Any lack of electric circuit or any deficiency caused by installation may result in an electric shock or fire.
Do not move and
Any deficiency caused by installation may result in an electric shock or fire. Ask your distributor or special vendor for moving and installation.
To dispose of this product, consult your dealer.
CAUTION
Do not install in any place exposed to flammable gas leakage. Flammable gases accumulated around the body of
Do not use in any special environment.
Using in any place exposed to oil (including machine oil), steam and sulfuric gas may deteriorate the performance significantly or give damage to the com- ponent parts.
Do not wash with water.
Doing so may cause an electric shock or a malfunction.
Do not install in any place at a temperature of more than 40 °C (104 °F) or less than 0 °C (32 °F) or exposed to direct sunlight.
Do not install in any steamy place such a bathroom or kitchen.
Avoid any place where moisture is condensed into dew. Doing so may cause an electric shock or a malfunction.
Do not install in any place where acidic or alkaline solution or special spray are often used.
Doing so may cause an electric shock or malfunction.
Do not touch any circuit board with your hands or with tools. Do not allow dust to collect on the circuit board.
Doing so may cause fire or an electric shock.
Do not touch any control button with your wet hands.
Doing so may cause an electric shock or a malfunction.
Do not press any control button using a sharp object.
Doing so may cause an electric shock or a malfunction.
2
Confirming the Supplied Parts
Check that the box includes the following parts in addition to this installation manual:
Parts Name | Quantity |
Wireless remote controller | 1 |
Remote controller holder | 1 |
AAA alkaline battery | 2 |
Tapping screws 4.1 ⋅ 16 | 2 |
Instruction book | 2 |
|
|
Only use AAA batteries (LR03). Replace low batteries with new AAA batteries (LR03). Observe the polarity of the batteries as indicated, and insert the negative end first.
1
