Mitsubishi Electronics WD-73C11 Resolving CEC Conflicts, Removing an HDMI Device, Menu, Channel

3 HDMI Control of CEC Devices 27

Resolving CEC Conflicts

Because each manufacturer selects which CEC func- tions to support, some devices may conflict with other devices. If control conflicts arise, you can:

•Turn off TV control of an individual CEC-enabled device (see below).

•Turn off CEC in the device itself. Refer to the device’s Owner’s Guide for instructions.

Turning Off the TV’s HDMI Control of a CEC Device

1.Press MENU on the TV remote control.

2.Highlight Inputs > HDMI Control.

3.Move to the device name and press ENTER to select Off to turn off the TV’s ability to control the device.

4.Press EXIT to clear the menu.

Inputs > HDMI Control menu

Removing an HDMI Device

1.Power off the device.

2.Disconnect the HDMI cable.

3.Press MENU on the TV remote control to enter the TV main menu.

4.Go to Inputs > Name.

5.Highlight the HDMI input name and press ENTER to select Delete.

6.Press EXIT to clear the menus.

Inputs > Name menu with Delete selected for HDMI-3.

Using HDMI Control

As an example of using HDMI Control, press PLAY on the device itself to:

•Power on the TV

•Switch to the device (no need to display the Input Selection menu)

•Begin play of the device

Direct Keys

Test your equipment with the TV’s remote control to find additional supported commands. See the table below for commands that may be available, depending on the individual device.

CEC-enabled VCR, DVD, and DVR functions that may be available:

Menu	Channel
Navigation	Tuning
	CH
ENTER	Digits 0–9,
	CANCEL
CANCEL	ENTER
(to cancel)

If you have a CEC-enabled A/V receiver, CEC-enabled devices connected to the A/V receiver with an HDMI cable may also be controllable. They can be selected from the TV’s Input Selection menu.

CEC-enabled A/V receiver functions. Try the VOL, MUTE, and menu-navigation keys.

For assistance call 1(800) 332-2119