DVD Player with Component Video

Connecting a DVD Player or Other S-Video Device

Note: The TV back panel and connections shown here are for reference only and may vary by model.

�

� �

� ��

� � �

��

� � ��

��

� � ��

��

(Figure 9)

1. Connect the Component Video cables from

(YCb Cr or YPbPr) VIDEO OUT on the back of

the DVD player to COMPONENT (1 or 2) on

the TV back panel. The correct connections are:

A. Y to Y

B. Cb or Pb to Pb

See Appendix B, page 65, for component video

signal compatibility information.

For digital audio connections, see your DVD

and A/V receiver Owner’s Guides.

2. Connect a set of audio cables from AUDIO OUT
	on the back of the DVD player to COMPONENT
	AUDIO Input (1 or 2) on the TV back panel.
•	The red cable connects to the R (right)channel
•	The white cable connects to the L (left) channel

NOTE: Some video game systems support component connections. Please refer to your video game console Owner’s Guide.

�

NOTE: If your DVD player supports progressive scan playback, be sure to set your player accordingly. Please refer to your DVD player’s Owner’s Guide.

(Figure 10)

1.Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV back panel.

2.Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT-2 on the TV back panel.

• The red cable connects to the R (right) channel

• The white cable connects to the L (left) channel

If your S-Video Device is mono (non-stereo), connect only the white (left) cable.