BenQ W1500 Connecting with video equipment, Preparations, Terminal, Picture quality, name, Video

Connecting with video equipment

You can connect the projector to any type of video equipment, such as a VCR, DVD player, Blu-ray player, digital tuner, cable or satellite decoder, video game console or digital camera. You can also connect it to a desktop or laptop PC or Apple Macintosh system. You need only connect the projector to a source device using just one of the connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below:

Terminal	Terminal appearance	Reference	Picture quality
name
HDMI		"Connecting HDMI devices" on	Best
		page 22
Component		"Connecting component-video	Better
Video		devices" on page 23
S-Video		"Connecting S-Video or video devices"	Good
		on page 23
Video		"Connecting S-Video or video devices"	Normal
		on page 23
PC (D-SUB)		"Connecting a computer" on page 24	Better

Preparations

When connecting a signal source to the projector, be sure to:

1.Turn off all equipment before making any connections.

2.Use only the correct type cables for each source with proper type plugs.

3.Ensure that all cable plugs are firmly fitted to the equipment jacks.

Note that all cables shown in the following connection diagrams may not be supplied with the projector (See "Shipping contents" on page 8 for details). Most cables are commercially available from electronics stores.

Important safety instructions 21